Tuesday, February 28, 2017

Newbie Tuesday: Gels, gels gels! Lavender & chamomile oil free gel moisturizer for normal skin types

You shared your opinion here, by e-mail, and on my new Facebook page for the blog, so we'll be spending a few more weeks on creating gelled products with Ultrez 20 and Sepimax ZEN

Last week we took a look at adapting a toner to become a gelled toner by incorporating Ultrez 20 into your recipe. But you could make a gel, then add your ingredients to it after the fact, as I did in this post. (I'm altering the recipe, though, because it contains a whole bunch of ingredients that don't get along with Ultrez 20. I've learned a lot since 2009!)

MAKING A THICK GEL WITH ULTREZ 20
96.5% distilled water
1.2% Carbopol Ultrez 20
1.6% triethanolamine or 18% lye solution*
0.5% liquid Germall Plus

Add your Ultrez 20 to water and mix gently to get all the flakes wet. You'll know they're wet enough when they are transparent or clear in the container, like the picture to the left. Let sit for 3 to 5 minutes, then add the TEA or 18% lye solution. Mix well. If you'll be storing the gel as is, please add the liquid Germall Plus or other suitable preservative. If you will be using it right away in other products, leave it out and incorporate a preservative into the next recipe.

The following recipe is great for normal skin types.

LAVENDER & CHAMOMILE OIL FREE GEL MOISTURIZER
LIQUID PHASE
30% lavender hydrosol
2% glycerin
2% panthenol
0.5% liquid Germall Plus

POWDER PHASE
0.5% powdered chamomile extract
0.5% allantoin

GEL PHASE
64.5% thick gel

Weigh your liquid phase into a container, mix well, then add the powdered chamomile extract and allantoin, and mix well until dissolved. Add the rest of the ingredients in any order, mix well, then pour into a bottle to be used as a toner or oil-free moisturizer.

If you feel this is too thick, add 10% more distilled water or other liquid, mix well, and see what you think. Or substitute 10% aloe vera for 10% of the distilled water as this will thin it down quite a lot.

And if you don't like the slightly brown colour of this recipe, I encourage you to use chamomile hydrosol in place of the brown coloured extract at up to 10% of the water amount.

If you don't like chamomile extract - although I'd encourage every skin type to use itconsider another powdered extract in its place. or add another one at the suggested usage rate. I really like using chrysanthemum extract as an anti-inflammatory ingredient, but there are loads of choices you could make. (We'll take a look at some variations over the next few days.) Check out the extracts section of the blog for more information!

To answer the question I know will be posed in the comments - the difference between last week's toner and this week's oil free gel moisturizer is..well, nothing. They both contain hydrating ingredients, hydrosols, extracts, and so on. The difference is that I tend to wipe off a toner and leave a moisturizer on my skin.

Join me tomorrow as we adapt this recipe for dry skin types!

Related posts:
Gels (revised for 2013)
One ingredient, five products: Gels
One ingredient, five products: Gels - making an aloe vera gel
How to make an eye liner sealant with gels
Formulating an under eye gel: Raymond's creation
Oil free gel moisturizer or make up remover with PEG-7 olivate
Gels: Hair styling products
Gels: Surfactant-y fun with gardener's hand scrub
Gels: Make a gelled toner
Gels: Hand sanitizer

If you'd like to play along or if you've missed a post, here's a listing of the complete series...
Newbie Tuesday: We're making facial products! 
Shopping list
Equipment list
Let's start making facial cleansers! - Your skin type
Surfactants - what are they?
Meet the surfactants
pH of our surfactants
Facial products - the base recipe
Turning your cleanser into an exfoliating cleanser (part one) - physical exfoliants
Turning your cleanser into an exfoliating cleanser (part two) - physical exfoliants
Turning your cleanser into an exfoliating cleanser by adding chemical exfoliants
Modifying your facial cleanser into a foamer bottle recipe
Creating a facial toner (part one)
Creating a facial toner (part two)
Creating a facial toner (part three) - cosmeceuticals
Creating a facial toner (part four) - adding cosmeceuticals
Gels, gels, gels! Ultrez 20
Gels, gels, gels! Sepimax ZEN
Making a gelled toner with Ultrez 20

Wednesday, February 22, 2017

New e-zine: Winter skin care products

Wow, there's been such a great response to the Green & Natural Emulsifiers e-zine! Thank you so much! Part two will be coming at some point this year, I promise!

I've just put out my new e-zine on making and adapting skin care products for winter, which you can buy here or on my e-books and e-zine page.

Check out the table of contents for this e-zine!

Or buy now for $13.00 Cdn.




I put these e-zines or short e-books of 25 to 40 pages out every month for those who subscribe at my Patreon page for $10 or more. Then the next month, you'll see them here for purchase. I'm also basing some of the classes I'm offering at Voyageur Soap & Candle around the e-zines like the Gels: Ooey Gooey Fun class and the Bath Time Fun Class!

The e-zine I'm offering to subscribers to my Patreon page this month is all about using cold emulsifiers like Aristoflex AVC, Emulthix (RM-2051), and Sucragel AOF. It'll be available here next month in the e-book and e-zine section of the blog! If you subscribe before March 1st, you'd receive this e-zine. If not, it'll be here for sale in mid-March or so.

Please note that the proceeds from the Patreon subscription and my e-zines go to my family, not to my youth programs. Proceeds from the five e-books go 100% to the youth programs my husband and I run from the Neighbourhood Learning Centre in Chilliwack, B.C. Click here to learn more.

Thank you so much to all of you for supporting my blog and my youth programs! I'm such a fortunate woman to have such great readers! 

Tuesday, February 21, 2017

Newbie Tuesday: Gels, gels, gels! Making a gelled toner with Ultrez 20

Last week, we met our gelling agents - Ultrez 20, a carbomer that has to be neturalized with something like triethanolamine or 18% lye, and Sepimax Zen, a pre-neutralized polymer. We'll play with Ultrez 20 this week and Sepimax Zen next week.

There are two ways to make something with Ultrez 20: You can add all the ingredients, then neutralize it, or you can make up a gel and add our ingredients to it after neutralization.

Let's take a look at the first way of making a gel with Ultrez 20 in this post.

Let's say you wanted to make a lovely gelled toner, like this simple rosewater from the first post on toners.

SIMPLE TONER FOR NORMAL SKIN - ROSE WATER & CHAMOMILE
HEATED WATER PHASE
56% distilled water
20% witch hazel
20% rose water or other hydrosol
2% glycerin, sodium lactate, or propylene glycol
0.5% allantoin

COOL DOWN PHASE
0.5% powdered chamomile extract
0.5% powdered cucumber or green tea extract
0.5% liquid Germall Plus

First, check to see if there are any ingredients that aren't compatible with Ultrez 20. 
Are there any cationic or positively charged ingredients? Nope.
Are there any that contain a lot of electrolytes? We'd have to leave out sodium lactate, but otherwise, nope!
Are there any salts? Again, nope.
So this recipe can be turned into a gel very easily! Yay!
Remember not to add any aloe vera liquid to this recipe as it's full of salts!

Second, consider how thick you want to make this product. 
If we add enough Ultrez 20 to make a thick gel - about 1.2% - we should get a nice, thick toner that will spread easily on our skin.

1.2% Carbopol Ultrez 20
1.6% triethanolamine or 18% lye solution*

So we'll need to remove 2.8% from the distilled water amount. (When we add something to the recipe, we always remove it from the distilled water amount. We have 2.8% extra here, so we remove 2.8% from the distilled water amount.)

Third, make the product! 

SIMPLE GELLED TONER FOR NORMAL SKIN - ROSE WATER & CHAMOMILE
WATER PHASE
43.2% distilled water
20% witch hazel
20% rose water or other hydrosol
2% glycerin or propylene glycol
0.5% allantoin
1.2% Ultrez 20

NEUTRALIZATION PHASE
1.6% triethanolamine or 18% lye solution

EXTRACTS AND PRESERVATIVES PHASE
10% distilled water, slightly warmed
0.5% powdered chamomile extract
0.5% powdered cucumber or green tea extract
0.5% liquid Germall Plus

1. Add all the ingredients in the water phase, except the Ultrez 20, in order into a container.

2. Add your Ultrez 20 to water and let sit for 3 to 5 minutes, depending upon how much powder you have used. (0.5% takes 3 minutes, up to 3% takes 5 minutes). Mix gently to get all the flakes wet. You'll know they're wet enough when they are transparent or clear in the container, like the picture to the left.

3. Add the neutralizer. This is a very alkaline ingredient that you add to the very acidic Ultrez 20 to create the gel. You can use an 18% sodium hydroxide solution, an 18% potassium hydroxide solution, or triethanolamine.

4. Dissolve the powdered extracts into about 10% slightly warmed distilled water and mix until dissolved. Add this along with the liquid Germall Plus and mix well.

5. You're done! Yay!

If you find this product is too thick for your tastes, you can reduce the amount of Ultrez 20 you use to 0.9% and use 1.2% neutralizer. If it's still too thick, reduce the amount of Ultrez 20 to 0.6% to 0.8% neutralizer.

Or you could add something like aloe vera at 10%, which will reduce the viscosity quite a bit - more than it would by just adding more water.

Or you could add a hydrolyzed protein at 2%. It's amazing how a very thick gel can become very thin by the inclusion of just 2% silk amino acids!

Let's take a look at how to modfy this more complicated toner from the second post on creating toners...

MODIFIED TONER FOR DRY SKIN WITH POLYQUATERNIUM 7
HEATED WATER PHASE
53% distilled water
20% rose water or lavender hydrosol
10% aloe vera liquid
5% witch hazel
2% polyquaternium 7
2% silk amino acids
2% glycerin
2% sodium lactate
0.5% allantoin

COOL DOWN PHASE
2% panthenol
0.5% powdered cucumber extract
0.5% powdered chamomile extract

0.5% liquid Germall Plus

First, check to see if there are any ingredients that aren't compatible with Ultrez 20. 
Are there any cationic or positively charged ingredients? Yes, polyquaternium 7 and silk amino acids are not compatible here.
Are there any that contain a lot of electrolytes? Yes, we have aloe vera.
Are there any salts? Sodium lactate and aloe vera.

What do we do, then? We can remove those ingredients easily, and replace them with more distilled water. But don't we want the properties those ingredients added to our product?

Part 1A: Alter the recipe or accept that we can't gel it! But the whole point is to gel this toner, so let's choose the former option and modify our recipe!

If we want a film former, sea kelp extract or bioferment offers some nice film forming without thinning out the gel. Add it up to 5% or so. I'll use it at 3% in this recipe.

If we want another humectant, we could increase the glycerin to add more - I wouldn't go over 4% as this could get sticky - or add something like propylene glycol or propanediol (aka Zemea, which is more natural).

If we want a skin conditioner like polyquat 7, we can use something like the sea kelp for it, but there's really no great substitute for a cationic ingredient. I'd say just add 2% distilled water back into the product.

So we are taking 16% worth of ingredients out of the toner - 10% aloe vera, 2% sodium lactate, 2% polyquat 7, and 2% silk amino acids - and we're adding 7.8% worth of ingredients back - 3% sea kelp extract, 2% extra glycerin, 1.2% Ultrez 20, and 1.6% TEA or 18% lye solution. So we need to add 8.2% distilled water to the mix. (See below for how this looks...)

Second, consider how thick you want to make this product. 
If we add enough Ultrez 20 to make a thick gel - about 1.2% - we should get a nice, thick toner that will spread easily on our skin.

1.2% Carbopol Ultrez 20
1.6% triethanolamine or 18% lye solution*

So we'll need to remove 2.8% from the distilled water amount (which we did above).

Third, make the product! 

MODIFIED GELLED TONER FOR DRY SKIN 
WATER PHASE
51.2% distilled water
20% rose water or lavender hydrosol
5% witch hazel
4% glycerin (or 2% glycerin, 2% propylene glycol or Zemea)
3% sea kelp or bull kelp bioferment
0.5% allantoin
1.2% Ultrez 20

NEUTRALIZATION PHASE
1.6% triethanolamine or 18% lye solution

SLIGHTLY WARMED WATER PHASE
10% distilled water
0.5% powdered cucumber extract
0.5% powdered chamomile extract

LAST PHASE
2% panthenol
0.5% liquid Germall Plus

1. Add all the ingredients in the water phase, except the Ultrez 20, in order into a container.

2. Add your Ultrez 20 to water and let sit for 3 to 5 minutes, depending upon how much powder you have used. (0.5% takes 3 minutes, up to 3% takes 5 minutes). Mix gently to get all the flakes wet. You'll know they're wet enough when they are transparent or clear in the container, like the picture to the left.

3. Add the neutralizer. This is a very alkaline ingredient that you add to the very acidic Ultrez 20 to create the gel. You can use an 18% sodium hydroxide solution, an 18% potassium hydroxide solution, or triethanolamine.

4. Dissolve the powdered extracts into about 10% slightly warmed distilled water and mix until dissolved. Add this along with the liquid Germall Plus and mix well.

5. You're done! Yay!

If you find this too thick, please see the notes above to thin it out, or join me either later this week or next Tuesday - depending upon how you answer the question below - to see how to make a gel to which we can add all kinds of lovely ingredients!

Question to you, my lovely readers: Would you like to see me write up more recipes on how to adapt your products to be gelled - for instance, more toners, facial cleansers, eye gels, and so on - or can you figure out how to do that on your own? Please respond as soon as you can as that'll help me decide what to write about over the next few days and into next week. Thanks! 

Thursday, February 16, 2017

Updated oil comparison charts for download

I've finally amalgamated all the information I have on oils into one handy dandy little chart for download as a PDF file. I'll have this permanently linked in the side bar and in the emollients section of the blog.

I'm sad I have to say this out loud, but considering the recent plagiarism I've had to deal with, it's not okay to copy this chart and use it to make money by selling it as part of a book or in a class for which you're being paid. Please post a link to this page if you want to share it. Please don't post the chart to your own blog; please just post the link so people will visit here and not get the idea that you're the one who compiled it. Have I covered all the potential bases so it's really clear that it's not okay to make money from my work or make other people think it's your work? Wow, this makes me really sad that I have to write this here...

You can, by all means, use it as a reference or quote from it - that's what we all do every day, and citing one's sources is what we do every day as writers, at school or work. 

Wednesday, February 15, 2017

Newbie Tuesday (on Wednesday): Gels, gels, gels! An introduction to Sepimax ZEN

We took a look at how to use Ultrez 20 yesterday, so let's take a look at using Sepimax ZEN in our gelled products today.

Sepimax ZEN (INCI: Polyacrylate Crosspolymer-6) is a pre-neutralized polymer we can use to create thick gels without having to do a lot of mixing.

It works well with electrolytes, so we can use it to make gels from aloe vera and surfactant mixes easily. It can handle acidic pH levels, so we can use AHAs and glycolic acid at up to 4%. As it’s anionic or negatively charged, we can’t use positively charged or cationic ingredients, like honeyquat, polyquat 7, or Incroquat BTMS-50 in it. (Having said that, I have been able to make some things work, which you'll see shortly...)

Sepimax ZEN is awesome with surfactants. At as low as 2% it increases foam and lather, and leaves behind a moisturized feel.

Sepimax ZEN can be thickened by mixing for about 10 minutes. Start with a lower speed – around 500 rpm – and move to 1500 rpm. Or weigh all the ingredients into a container, mix a bit to integrate the ZEN, then leave it for up to 8 hours to hydrate. But you have to leave it alone! (Okay, you can take a look from time to time, but don’t mix it or you’ll ruin it!)

It advertises on the fact that it can incorporate vegetable and seed oils as well as esters, like C12-15 alkyl benzoate, to create cream gels. It says it can do up to 40% oils, but I've had trouble going above 10%.

As an aside, it’s a great addition to a product that wouldn’t normally handle electrolytes, like a lotion made with Aristoflex AVC. (Look for those posts soon!) 

Sepimax ZEN is fantastic for making aloe vera gels as it can handle all those electrolytes! I’ve used up to 30% aloe vera with 3% ZEN to make a thick, hydrating gel. (Easiest way to do it – aloe, water, preservative, ZEN – let sit for 8 hours.)

I've found it makes really clear gels, too, like the one you see to the left. It may make a clear gel for surfactant blends, but won't for products that contain oils thanks to the joys of emulsification.

How much can you use in a product? I’ve found that 3% is a very very thick gel, so I generally stick to 2% to 2.5% in a product. You can go lower, depending upon the ingredients you use. I suggest playing with it in your favourite recipes and keeping great notes on how it works! You'll see me using all kinds of amounts in the recipes we make in this series as well as others.

BASIC SEPIMAX ZEN GEL
96.5% distilled water
0.5% liquid Germall Plus or preservative of choice
3% Sepimax ZEN

Add the distilled water and preservative into a container and mix. Sprinkle Sepimax ZEN on the water. Wait 8 hours. Do not mix during that time. I know you want to, but don’t! After 8 hours – ta da! You have a lovely thick gel!

Or you can put the powder in the water, mix lightly with a fork until the product is wetted, then start mixing. Start at a lower speed with a beater on a hand mixer, then move to a higher speed for about 10 minutes.

I've found that when I mix the product, it's not as thick as the version that sits for a while. But choose whatever works for you best!

We can create the gel the way I've done above, then add ingredients to it, or we can add the ingredients into the container, then gel it. In general, I tend to put all the ingredients into the container, then let it sit for 8 hours. You'll see examples of those kinds of recipes next week and the week after. 

As an aside, I know I didn't suggest buying Sepimax ZEN when I shared the shopping list, but you can get it at Voyageur Soap & Candle (Canada) and Lotioncrafter (USA), so I'll be discussing it in this series as well as the Ultrez 20. 

Join me next Tuesday to play around with Ultrez 20 and ZEN to make some awesome facial products! 

If you'd like to play along or if you've missed a post, here's a listing of the complete series...
Newbie Tuesday: We're making facial products! 
Shopping list
Equipment list
Let's start making facial cleansers! - Your skin type
Surfactants - what are they?
Meet the surfactants
pH of our surfactants
Facial products - the base recipe
Turning your cleanser into an exfoliating cleanser (part one) - physical exfoliants
Turning your cleanser into an exfoliating cleanser (part two) - physical exfoliants
Turning your cleanser into an exfoliating cleanser by adding chemical exfoliants
Modifying your facial cleanser into a foamer bottle recipe
Creating a facial toner (part one)
Creating a facial toner (part two)
Creating a facial toner (part three) - cosmeceuticals
Creating a facial toner (part four) - adding cosmeceuticals
Gels, gels, gels! Ultrez 20

Tuesday, February 14, 2017

Newbie Tuesday: Gels, gels gels! An introduction to Ultrez 20

I do love playing with gels. I can thicken a toner, make an eye gel, create a new facial cleanser, formulate an after sun gel with aloe, and so on. Let's take a look at two ingredients I've been using a lot to make gels lately - Ultrez 20 and Sepimax ZEN.

ULTREZ 20 (INCI: Acrylates/C10-30 Alkyl Acrylate Crosspolymer) 
What is this exciting polymer that makes ooey gooey fun? From Lubrizol: "A self-wetting rheology modifier designed to impart moderate-to-high viscosity as well as stabilizing and suspending properties to personal care applications." In other words, it's a white powdery thingie that you add to water to create a gel that will thicken your creations.

Sounds awesome, but there's always a down side, eh? Gels don't tend to play well with electrolytes, cationics, or salts - three things we may want to include in our gels. Ingredients like aloe vera or sodium PCA contain a lot of electrolytes and salts. Cationic or positively charged ingredients are things like cationic polymers like polyquaternium 7 or honeyquat, as well as Incroquat BTMS-50 and some hydrolyzed proteins. (For instance, I know the silk amino acids from Voyageur Soap & Candle thins out Ultrez 20 thick gels.) As well, the final pH of a gel with Ultrez 20 should be around 4.5 to 5, so you can't add things like glycolic acid or AHAs easily.

Ultrez 20 notes that it can handle up to 10 to 12% surfactants, which isn't a lot, so this isn't the thing to thicken up a body wash or bubble bath with 40% to 50% surfactants. (Having said this, I have tried it and it will work well for a few months, so if you're going to use it quickly or want to make something like bubble goo for the kids, have fun!) It is great if you want to thicken up a facial cleanser with 10% surfactants that simply don't want to thicken any other way! Try thickening this foaming facial cleanser we made for foamer bottles with Ultrez 20.

I'll be sharing some surfactants that don't thicken well with Crothix or salt in the next few weeks, and they work well with this gellant! 

What do I mean by "it won't work well"? If the gel doesn't like your ingredients, it'll stop being a gel. It's not the worst thing in the world as the product will still work, but it won't be a gel any more. Or it'll thin out to be a thin gel instead of the thick version you want.

Here's the basic way to make a gel as recommended by the manfacturer (with my notes).

1. Add your Ultrez 20 to water and let sit for 3 to 5 minutes, depending upon how much powder you have used. (0.5% takes 3 minutes, up to 3% takes 5 minutes). Mix gently to get all the flakes wet. You'll know they're wet enough when they are transparent or clear in the container, like the picture to the left.

2. Add your anionic surfactants (check the information on your surfactant - for instance, coco betaine is an amphoteric.)

3. Add the neutralizer. This is a very alkaline ingredient that you add to the very acidic Ultrez 20 to create the gel. You can use an 18% sodium hydroxide solution, an 18% potassium hydroxide solution, or triethanolamine.

If you're using an 18% sodium hydroxide or lye solution, you'll want to use 2.3 grams of this solution for every 1 gram of Ultrez 20. If you're using triethanolamine, you'll want to use 1.5 grams of TEA to 1 gram of Ultrez 20. You could also use something like an 18% solution of potassium hydroxide at 2.7 grams to 1 of Ultrez 20, but I haven't tried that, so I can't guarantee anything, but it should work well.

Please note, in the recipes that will follow, I use a ratio of 4:3 for TEA or 18% lye to Ultrez 20 in the form of 1.6% TEA or 18% lye to 1.2% Ultrez 20. This means I'm using slightly more Ultrez 20 than I need, but I've found the pH and viscosity works really well for this ratio. I encourage you to be more accurate than I am being by using the proper ratio I mention above. Get yourself a really nice scale that weighs down to 0.01 grams and have at it!

If you choose to make the 18% lye solution, weigh out 82 grams of distilled water into a heat proof container, like a Pyrex jug, and add 18 grams lye to it. Mix well, then let it sit undisturbed until it cools down. (The container will get very very hot. This is an exothermic reaction or one that generates heat. How awesome is that?) When it has cooled, put into a clean bottle with the words "THIS IS LYE. DO NOT DRINK. IF YOU DO, AND YOU DIE, IT'S NOT MY FAULT. I DID WARN YOU" on it and store in a safe place.

4. Add amphoteric surfactants, silicones, cationics, salts, etc. in that order.

5. Add pearlizing ingredients like mica, glycol distearate and so on.

6. Add fragrance, dye, and preservative (you don't need to add preservative if you've done it in the gel).

So basically what you are doing is adding these gel flakes to water, getting them wet, then neutralizing the process with 18% lye solution or TEA to create a gel.

MAKING A THICK GEL WITH ULTREZ 20
96.5% distilled water
1.2% Carbopol Ultrez 20
1.6% triethanolamine or 18% lye solution*
0.5% liquid Germall Plus (or preservative of choice)

Follow the directions as noted above. As you can see in the picture, this makes a very thick gel that works well when you add liquids to them to thin it out.

When I'm using gels, I do one of two things - I make up a gel and add ingredients to it or I add the ingredients I'm using in place of some of the distilled water amount you see above. For instance, I might use 10% rose water and 86.5% distilled water for a product. Or I could make up this gel, then add 10% rose water. Adding something to the gel after it's made will thin it out, which isn't a bad thing as it's very thick.

Related posts:
Gels (revised for 2013)
One ingredient, five products: Gels
One ingredient, five products: Gels - making an aloe vera gel
How to make an eye liner sealant with gels
Formulating an under eye gel: Raymond's creation
Oil free gel moisturizer or make up remover with PEG-7 olivate
Gels: Hair styling products
Gels: Surfactant-y fun with gardener's hand scrub
Gels: Make a gelled toner
Gels: Hand sanitizer

Join me tomorrow as we take a look at using Sepimax ZEN as a gelling agent. We'll take a look at using these gels next Tuesday for the Newbie Tuesday post! As an aside, I know I didn't suggest buying Sepimax ZEN when I shared the shopping list, but you can get it at Voyageur Soap & Candle (Canada) and Lotioncrafter (USA), so I'll be discussing it in this series as well as the Ultrez 20.

If you'd like to play along or if you've missed a post, here's a listing of the complete series...
Newbie Tuesday: We're making facial products! 
Shopping list
Equipment list
Let's start making facial cleansers! - Your skin type
Surfactants - what are they?
Meet the surfactants
pH of our surfactants
Facial products - the base recipe
Turning your cleanser into an exfoliating cleanser (part one) - physical exfoliants
Turning your cleanser into an exfoliating cleanser (part two) - physical exfoliants
Turning your cleanser into an exfoliating cleanser by adding chemical exfoliants
Modifying your facial cleanser into a foamer bottle recipe
Creating a facial toner (part one)
Creating a facial toner (part two)
Creating a facial toner (part three) - cosmeceuticals
Creating a facial toner (part four) - adding cosmeceuticals

Sunday, February 12, 2017

Weekend Wonderings: How can you incorporate a preservative into a shampoo bar?

In this post, Liquid Germall Plus, Irina asks: Could you be so kind to show us the process itself, how do you incorporate a preservative in to solid conditioners and shampoo bars, please? Preservatives are heat sensitive, but bars are getting had, not pourable way before 40 C, how do you manage to put the preservative in the bars and make sure it mixed well? Also which one do you use for the bars? Please explain.

Not all preservatives are heat sensitive. For instance, Phenonip or Germaben II, the preservatives I use in my shampoo and conditioner bars, are fine at up to 70˚C, so you can use either. So many preservatives are not heat sensitive - Cosmocil CQ is fine at up to 80˚C, as are the Liquipar preservatives, like Liquipar Oil or Liquipar Optima. (Rather than me listing every possible preservative, please check out the preservatives section of the blog for more entries on preservatives.)

For my bars - I can't believe I haven't written about these bars in a while considering they're something I use all the time! - I add the Phenonip or Germaben II into the container as they are heating, then pour them or scoop them into molds.

Related posts:
Shampoo bars for dry hair
Conditioning shampoo bars for oily hair
One product, five recipes: Shampoo bar
Conditioner bars

Friday, February 10, 2017

New Facebook page for this blog

I wanted to let you know about the new Facebook page for the blog, which you can find under swiftcraftymonkey! I'll post there when I've written a new post here, when I've put out a new e-zine, when I have new classes coming up, when I find an interesting article or picture elsewhere, and more. I'm also on Twitter as @SwiftCraftyM

I admit I'm not great on social media as I tend to be more about the writing than the pictures, but I am trying! It's the wave of the future and all that stuff...

Please visit the Facebook page above rather than friending me or messaging me on my personal page. I definitely won't be answering any personal messages through my personal profile and the Facebook page any more as it's just too much work on top of writing the blog, answering e-mail, or writing on Patreon. Feel free to post on the Facebook page and I'll do my best to answer it, but my focus is always on the comments on this blog and the Patreon feed

I couldn't think of a picture relating to social media, so I put a picture of baby Sasja playing in her tubes. There's something about this picture that reminds me of the end of the theme song for Crazy Ex-Girlfriend, season 2, when she sings "BLAM!" I know, weird, right? 

Thursday, February 9, 2017

Valentine's Day class at Voyageur Soap & Candle

The rains have come to wash the snow away, so I'll be able to make it to Voyageur Soap & Candle in Surrey, BC, this Saturday from 10 to 2 to offer a Valentine's Day themed class! Join me to make an awesome soy candle, a cocoa butter and babassu massage bar, a dry brushing and massage oil, fragrant soy wax melts, and a luscious whipped body butter in time to celebrate with your sweetie or enjoy for yourself.

If you're interested in this class - or any of my other classes - please call customer service at Voyageur at 604-530-8979

Wednesday, February 8, 2017

Information on my Patreon site and how to subscribe, if you're interested

I'm seeing a lot of new people here, no doubt thanks to the issues around plagiarism I've been facing over the last almost two weeks. And a number of you said I should get the information out about my Patreon subscription site, so I'm sharing it with you again today. I post there regularly, and you can find things like how to duplicate a recipe and a question and answer section. This month I started a thread for sharing and troubleshooting your fails. There are different levels of subscription: If you are interested in the e-zines - which you can find here - subscribe at $10 a month to get one each month. If you don't really care about those, you can subscribe at lower levels of $1, $3, or $5. 

As you may or may not know, my work hours were cut to three days a week in May of last year. I took quite a few months off without pay to look after my mom. (I'm still off work as of today, but hoping to go back in March.) Patreon was a great way for me to be able to take that time off and create more content for the blog rather than looking for a second job. 

Thank you so much to all of you for your wonderful support. I really do have the loveliest readers!

Please note that the money raised by the e-zine and Patreon site goes to my family. We continue to donate every penny raised by the sales of the e-books to the Rated T for Teen youth programs Raymond and I run. 

That's what it looks like outside my door right now! We've had record snow falls since last week, and Raymond had to spend hours shovelling and getting the car out. (It's that pile of snow to the middle right of the picture!) It's been nice being in the house together with baby Sasja, and the forecast calls for more snow tonight then freezing rain, so I think we might be indoors a little longer! I'm hoping for a crafting day tomorrow, if the power stays on! 

Tuesday, February 7, 2017

Newbie Tuesday: New schedule of posts...

Wow, I'm really off track again thanks to the intellectual property theft and plagiarism I've been dealing with lately, and I ask your indulgence as I try to figure out how to fit all the things in that need to be done and keep up with posts on the blog. 

I hope you enjoyed making toners, and I can't encourage you enough to visit any of the posts on the facial products we've been making to share your recipes.

Here's the new schedule for the facial products posts...

Tuesday, February 14th - Gels, gels, gels - introduction to carbomers
Tuesday, February 21st - Gels, gels, gels - part two
Tuesday, February 28th - Gels, gels, gels - part three
Tuesday, March 7th - Gels, gels gels - summary and recipe round up
Tuesday, March 14th- Micellar waters - introduction
Tuesday, March 21st - Micellar waters - part one
Tuesday, March 28th- Micellar waters - part two
Tuesday, April 4th - Micellar waters and make-up removers
Tuesday, April 11th - Water soluble facial product round up

As a note, I'll be at the Handcrafted Soap & Cosmetic Guild conference in Las Vegas in late April - early May offering a seminar on Facial Moisturizers 101, so I will be taking a break from this series to get ready for and offer those workshops.

We'll get back on track in mid-May-ish with facial oils, sera, moisturizers, and other things that contain oil. I'll put the shopping list for the mid-May posts on-line in early April. We don't want to be ordering oils too soon as they can go rancid.

If you have suggestions for products you'd like to see in this series, please include your thoughts in the comments below. Please note we are not duplicating commercial products exactly, I'm just looking for some ideas for categories that look interesting, like micellar waters, for instance.

If you'd like to play along or if you've missed a post, here's a listing of the complete series...
Newbie Tuesday: We're making facial products! 
Shopping list
Equipment list
Let's start making facial cleansers! - Your skin type
Surfactants - what are they?
Meet the surfactants
pH of our surfactants
Facial products - the base recipe
Turning your cleanser into an exfoliating cleanser (part one) - physical exfoliants
Turning your cleanser into an exfoliating cleanser (part two) - physical exfoliants
Turning your cleanser into an exfoliating cleanser by adding chemical exfoliants
Modifying your facial cleanser into a foamer bottle recipe
Creating a facial toner (part one)
Creating a facial toner (part two)
Creating a facial toner (part three) - cosmeceuticals
Creating a facial toner (part four) - recipes including cosmeceuticals

Monday, February 6, 2017

A few thoughts about theft and plagiarism...

I've been doing a lot of thinking over the last few days about all this plagiarism stuff, and I ask you to bear with me as I process some of my thoughts...

My dad was one of the most generous people I've ever met. He gave of himself, his possessions, his money, his knowledge. He never sold things or held garage sales; our family donated what we didn't need or want to those who might or to a local agency, like the Salvation Army.

The thing that angered him the most was theft. If you wanted something, all you had to do was ask. You didn't need to steal from someone who gave so joyously and so copiously...but people did. They took advantage of his good nature time and time again, but still he gave. When we moved to Chilliwack, we met a lovely family down the road who accepted so graciously what my mom and dad had to offer, and they gave so much to us in return. In the years since, the members of this family have shared what they learned with so many others, keeping my parents' spirits alive. In the end, he found people who would appreciate what he gave, and it made all of us so happy.

My dad wasn't all hearts and flowers, though. He also used to say that all it takes is one bugger to spoil it for the rest of us, and last week I found myself a bugger (or three). When I saw how many people were enriching themselves through my hard work, my first thought was to shut all this down, to hide everything I've ever shared so no one could steal from me again.

I'm not an idiot: I know when I release something on-line, it takes on a life of its own. Horrible and unscrupulous people will abuse it, but so many more good, kind, and wonderful people could do amazing things with it, and it makes my heart so happy to hear your stories about what you've made or learned. Maybe you were inspired to learn a bit of chemistry or share something you made with someone you love. Maybe you discovered a shampoo that didn't make your hair feel awful or a lotion that made your skin feel nice. Maybe I gave you a laugh. Maybe you made some money. In the end, it's why I do what I do, and I'm still here, sharing what I know.

If you know so little about a topic that you have to steal recipes, writing, and research from someone else, you will be found out soon enough. It'll be obvious to your students pretty darn soon as they ask you questions and you can't answer them. Perhaps they'll notice that your writing voice changes every few paragraphs or pages. I've read that it takes about three years for someone's incompetence to catch up with them, so maybe your time is almost up?

My dad used to say that we don't need to get back at people who hurt us because karma will bite them in the end, and he was (almost always) right. If you can steal from other people, enrich yourself unjustly in a field about which you know nothing, and aren't terrified of being found out as a fraud every minute of the day, I say kudos to you, my friend. You are made of stronger stuff than I am.